Data last collected:
PowerPlantFactsEvidence report · prepared 19 October 2026https://powerplantfacts.com/entity/15
EIA plant 15
Clanton · Chilton · AL
Lay Dam
Operated by Alabama Power Co
Published location
Where is Lay Dam?
This locator uses the coordinates in the approved source record. It shows geographic context, not a site boundary, safety zone or property-risk area.
32.963300, -86.518700
Open the interactive map ↗Map data © OpenStreetMap contributors
Capacity is not generation. Nameplate MW describes equipment; annual MWh describes recorded output. Proposed and retired units are not added to operating capacity.
Equipment mix
Operating capacity by technology
Grouped from this plant’s represented generator records. Use the AL plant index for regional peers.
See the evidence
Electricity output across the year
Monthly net generation shows the seasonal shape of this plant's represented output. A negative value is retained when the source reports net consumption.
174,111
261,495
380,936
435,071
547,595
617,907
718,520
814,974
919,070
1023,380
1124,824
1236,473
MWh net generation · 2024 final edition · EIA 923 represented operating rows. 12 of 12 supplied rows shown; 0 missing values omitted. Months with no reported numeric value are omitted, not treated as zero.
Read the chart as a table
| Record | MWh net generation |
|---|---|
| 1 | 74,111 |
| 2 | 61,495 |
| 3 | 80,936 |
| 4 | 35,071 |
| 5 | 47,595 |
| 6 | 17,907 |
| 7 | 18,520 |
| 8 | 14,974 |
| 9 | 19,070 |
| 10 | 23,380 |
| 11 | 24,824 |
| 12 | 36,473 |
2024 monthly net generation
| Month | Net generation |
|---|---|
| 1 | 74,111 MWh |
| 2 | 61,495 MWh |
| 3 | 80,936 MWh |
| 4 | 35,071 MWh |
| 5 | 47,595 MWh |
| 6 | 17,907 MWh |
| 7 | 18,520 MWh |
| 8 | 14,974 MWh |
| 9 | 19,070 MWh |
| 10 | 23,380 MWh |
| 11 | 24,824 MWh |
| 12 | 36,473 MWh |
Operating generators
| ID | Technology | Fuel | MW | Status |
|---|---|---|---|---|
| 1 | Conventional Hydroelectric | WAT | 29.5 | OP |
| 2 | Conventional Hydroelectric | WAT | 29.5 | OP |
| 3 | Conventional Hydroelectric | WAT | 29.5 | OP |
| 4 | Conventional Hydroelectric | WAT | 29.5 | OP |
| 5 | Conventional Hydroelectric | WAT | 29.5 | OP |
| 6 | Conventional Hydroelectric | WAT | 29.5 | OP |
Continue exploring
Similar-capacity plants in the same state
Identity, technology and limitations
EIA plant ID
15
Sector
Electric Utility
Water source
Coosa River
Data edition
2024-final
Use this record
Questions this evidence can answer
01What exactly is this record?
Use the name, place, date and identifiers above to confirm that you have the right Lay Dam power plant: capacity and generation | PowerPlantFacts record.
02What does the evidence establish?
Read the reported values with their units, coverage dates and source notes. Keep observed facts separate from estimates or interpretation.
03What should I verify next?
Follow the primary-source links and check the limitations before using this evidence for a decision, comparison or citation.
A closer look at Lay Dam
Variation in the published months
Across 12 numeric monthly generation entries, 3 has the highest recorded value (80,936 MWh) and 8 the lowest (14,974 MWh). Their difference is 65,962 MWh. Missing months have not been treated as zero.
Generator capacity in different operating conditions
| Generator ID | Technology | Nameplate MW | Summer MW | Winter MW | Minimum load MW |
|---|---|---|---|---|---|
| 1 | Conventional Hydroelectric | 29.5 | 30.0 | 30.3 | 29.0 |
| 2 | Conventional Hydroelectric | 29.5 | 30.0 | 30.3 | 29.0 |
| 3 | Conventional Hydroelectric | 29.5 | 30.0 | 30.3 | 29.0 |
| 4 | Conventional Hydroelectric | 29.5 | 30.0 | 30.3 | 29.0 |
| 5 | Conventional Hydroelectric | 29.5 | 30.0 | 30.3 | 29.0 |
| 6 | Conventional Hydroelectric | 29.5 | 30.0 | 30.3 | 29.0 |
EIA-860 2024 final source. Ratings describe capacity, not actual generation or availability. Missing ratings are not zero.
Source: US Energy Information Administration Form EIA-860 2024 plant and operable-generator workbooks; archive 2024. US EIA-authored information is generally public domain; cite EIA, preserve third-party exceptions, changes and no-endorsement context. Source-specific derived data.