Data last collected:
PowerPlantFactsEvidence report · prepared 19 October 2026https://powerplantfacts.com/entity/52147
EIA plant 52147
San Diego · San Diego · CA
CP Kelco San Diego Plant
Operated by CP Kelco US Inc.
Published location
Where is CP Kelco San Diego Plant?
This locator uses the coordinates in the approved source record. It shows geographic context, not a site boundary, safety zone or property-risk area.
32.694700, -117.143600
Open the interactive map ↗Map data © OpenStreetMap contributors
Capacity is not generation. Nameplate MW describes equipment; annual MWh describes recorded output. Proposed and retired units are not added to operating capacity.
Equipment mix
Operating capacity by technology
Grouped from this plant’s represented generator records. Use the CA plant index for regional peers.
See the evidence
Electricity output across the year
Monthly net generation shows the seasonal shape of this plant's represented output. A negative value is retained when the source reports net consumption.
14,179
23,520
36,541
45,694
55,646
66,473
76,566
86,648
96,432
106,740
115,660
126,542
MWh net generation · 2024 final edition · EIA 923 represented operating rows. 12 of 12 supplied rows shown; 0 missing values omitted. Months with no reported numeric value are omitted, not treated as zero.
Read the chart as a table
| Record | MWh net generation |
|---|---|
| 1 | 4,179 |
| 2 | 3,520 |
| 3 | 6,541 |
| 4 | 5,694 |
| 5 | 5,646 |
| 6 | 6,473 |
| 7 | 6,566 |
| 8 | 6,648 |
| 9 | 6,432 |
| 10 | 6,740 |
| 11 | 5,660 |
| 12 | 6,542 |
2024 monthly net generation
| Month | Net generation |
|---|---|
| 1 | 4,179 MWh |
| 2 | 3,520 MWh |
| 3 | 6,541 MWh |
| 4 | 5,694 MWh |
| 5 | 5,646 MWh |
| 6 | 6,473 MWh |
| 7 | 6,566 MWh |
| 8 | 6,648 MWh |
| 9 | 6,432 MWh |
| 10 | 6,740 MWh |
| 11 | 5,660 MWh |
| 12 | 6,542 MWh |
Operating generators
| ID | Technology | Fuel | MW | Status |
|---|---|---|---|---|
| GEN2 | Natural Gas Fired Combustion Turbine | NG | 10 | OP |
| GEN3 | Natural Gas Fired Combustion Turbine | NG | 10 | OS |
| GEN1 | Natural Gas Fired Combustion Turbine | NG | 9.2 | OP |
Continue exploring
Similar-capacity plants in the same state
Identity, technology and limitations
EIA plant ID
52147
Sector
Industrial CHP
Water source
Unavailable
Data edition
2024-final
Use this record
Questions this evidence can answer
01What exactly is this record?
Use the name, place, date and identifiers above to confirm that you have the right CP Kelco San Diego Plant power plant: capacity and generation | PowerPlantFacts record.
02What does the evidence establish?
Read the reported values with their units, coverage dates and source notes. Keep observed facts separate from estimates or interpretation.
03What should I verify next?
Follow the primary-source links and check the limitations before using this evidence for a decision, comparison or citation.
A closer look at CP Kelco San Diego Plant
Variation in the published months
Across 12 numeric monthly generation entries, 10 has the highest recorded value (6,740 MWh) and 2 the lowest (3,520 MWh). Their difference is 3,220 MWh. Missing months have not been treated as zero.
Reading the MW column
In the 3 numeric rows displayed in this table, MW ranges from 9.2 (GEN1) to 10 (GEN2, GEN3). The difference is 0.8 in the column's stated units. This summary covers the displayed rows and retains the table's period and scope.
Generator capacity in different operating conditions
| Generator ID | Technology | Nameplate MW | Summer MW | Winter MW | Minimum load MW |
|---|---|---|---|---|---|
| GEN1 | Natural Gas Fired Combustion Turbine | 9.2 | 9.2 | 9.2 | 7.0 |
| GEN2 | Natural Gas Fired Combustion Turbine | 10.0 | 9.3 | 9.3 | 7.0 |
| GEN3 | Natural Gas Fired Combustion Turbine | 10.0 | 9.3 | 9.3 | 7.0 |
EIA-860 2024 final source. Ratings describe capacity, not actual generation or availability. Missing ratings are not zero.
Source: US Energy Information Administration Form EIA-860 2024 plant and operable-generator workbooks; archive 2024. US EIA-authored information is generally public domain; cite EIA, preserve third-party exceptions, changes and no-endorsement context. Source-specific derived data.